A few basic tools turn a kitchen-table cleaning session into a proper gunsmithing bench: something to hold the gun, drivers that fit the screws, punches that won’t mar the finish, and a handful of platform-specific tools for sights, triggers and disassembly. Here’s what’s worth having and why.
1. Something to hold the firearm
- Gun vise / cradle: holds a rifle or shotgun steady for cleaning, scope mounting and general work, without clamping the finish in a metal jaw. Tipton Gun Vise
- AR vise blocks: for AR work, clamp the receiver — not the gun — in a bench vise.
- Lower receiver: Wheeler AR Armorer’s Vise Block · ProMag Reversible AR-15 Block
- Upper receiver: Wheeler Delta Series AR-15 Upper Vise Clamp
- Pistol vise block: holds a pistol frame or slide so you can work on sights and internals. NcSTAR Vise Block for Glock (standard, compact, subcompact)
2. Gunsmith drivers (not hardware-store screwdrivers)
Firearm screws are often soft and have narrow, parallel-sided slots. Hardware-store screwdrivers are tapered and tend to cam out and chew up the head. Gunsmith bit sets use hollow-ground slotted bits plus the hex and Torx sizes used on optics, mounts and modern firearms.
- Wheeler 36 Piece Spacesaver Driver Set — compact starter set
- Wheeler 30 Piece Hex/Torx Bench Driver Set · Wheeler P-Handle 30 Piece Driver Set
- Wheeler 65 Piece Hex/Torx Driver Set
- Wheeler 100 Piece Professional Screwdriver Set — the full bench set
Replacement screws: when a screw is already stripped or lost, a gunsmith screw assortment saves a trip. Pachmayr Master Gunsmith Screw Kit, 277 pieces
3. Punches, picks and files
- Brass punches are softer than steel, so they’re less likely to mar pins or finishes — good for drift sights and general disassembly. Wheeler Brass Punch Kit, 8 piece · Otis Pro Plus Brass Punch Set, 5 piece
- Hammer and punch sets: Weaver Hammer & Punch Set
- Picks reach springs, detents and debris in tight spots. Otis Pro Plus Gunsmithing Pick Set, 9 piece
- Files for fitting and deburring. Wheeler Professional Gunsmithing File Set, 18 piece
4. Pistol-specific tools
Glock
- Disassembly punch for pins: TRUGLO Glock Disassembly Tool
- Magazine baseplate removal: TRUGLO Mag-Wrench for Glock · Otis 8-in-1 Pistol T-Tool
- Sights: TRUGLO Front Sight Tool · TRUGLO Sight Install Tool · TRUGLO Sight-Setter
1911
- The barrel bushing on many 1911s is tight enough to need a bushing wrench for takedown. Kimber Bushing Wrench for 1911
Dovetail sights (most handguns)
- A sight pusher moves dovetail sights evenly and controllably — far kinder to sights than a punch and hammer. NcSTAR Universal Pistol Sight Pusher
5. Rifle sight and scope tools
- AR front sight post: Wheeler AR Front Sight Tool · TROY BattleSight Adjustment Tool
- Scope rings: ring alignment bars check that rings are in line; lapping evens out the contact surface before the scope goes in. Wheeler Scope Ring Alignment & Lapping Kit, 34mm
6. Trigger measuring
When you change springs or a trigger, measure the result instead of guessing.
Starter bench vs full bench
| Starter bench | Full bench | |
|---|---|---|
| Holding | Gun vise | + AR and pistol vise blocks |
| Drivers | 36-piece Spacesaver set | 100-piece set + replacement screw kit |
| Punches | Brass punch kit | + hammer & punch set, picks, files |
| Platform tools | Tools for the guns you own (Glock, 1911, AR) | Sight pusher, ring lapping kit |
| Measuring | — | Trigger gauge |
Building or repairing an AR? See the companion guide: AR-15 Armorer’s Tool Kit: The Tools You Actually Need. Browse everything in Gun Tools.
Always make sure a firearm is unloaded before working on it, and follow the manufacturer’s instructions for disassembly and parts installation.